Ika RC 2 basic Uživatelský manuál Strana 1

20000004342IKA® RC 2 basicRC 2_112014Reg.-No. 4343-01Operating instructions EN

10Before commissioning, make sure that the device has not been moved for one hour.Check whether the voltage specied on the type plate matc

11Menu settings• Maximum temperature (HIT):The maximum adjustable value: 40 °C.• Minimum temperature (LO T):The minimum adjustable value: -20 °C.• Max

12• Temperature control type (AUTO):AUTO 1: AUTO 1 is the default setting. The default PID settings are used automatically.Cooling down curve in AUTO

13Set the rst point temperature (step 1, e.g. 10 °C) with “Pump (+)” button (F) or “Pump (-)” button (G). Con-rm the setting by pressing “OK/Pump“ b

14Command syntax and format:The following applies to the command set:- Commands are generally sent from the computer (Master) to the device (Slave).-

15USB cable A - Micro B 2.0:This cable is required to connect USB port (11) to a PC.USB micro BUSB AAFig. 15Maintenance and cleaningTo avoid contamina

16Error codesAccessories• Water bath protective media:AQ.1 Aquacide 1• Tubing, hoses, adapters and couplings:LT 5.20 Metal hose (isolated M16 x 1)

17Technical dataNominal voltage VAC 230 ± 10% / 115 ± 10% Frequency Hz 50 / 60 Max. input power W 300Working temperature range °C -20 ... RTOperating

18WarrantyIn accordance with IKA® warranty conditions, the warranty period is 24 months. For claims under the warranty please contact your local deale

IKA® - Werke GmbH & Co.KGJanke & Kunkel-Str. 10D-79219 StaufenTel. +49 7633 831-0Fax +49 7633 [email protected]

2Fig. 11451212Fig. 2237681011121249Item Designation 1 Operator panel and display2 Mains switch3 Power socket 4 Ventin

3ContentsEN PageEC Declaration of Conformity ...

4Explication of warning symbolsSafety instructionsGeneral information:• Read the operating instructions completely before starting up and follow the s

5• A laboratory circulator refrigerates and circulates uid according to specied parameters. This involves hazards due to low temperatures and ge

6Unpacking• Unpacking:- Please unpack the device carefully- In the case of any damage a detailed report must be sent immediately (post, rail or forwar

7Fig. 6• Filling and draining:- Before lling the uid into the bath, open the venting grid as indicated in following gure.- Check and make sure th

8• Fluids (Standard information for IKA® uid):No.IKA® Designation Operating temperature range for open bath application(°C)Operating temperature rang

9max. 10 ˚• Moving the device:Empty all fluid in the bath before moving device from one place to other place.The device can be lifted up and moved by